Authors
- Jamal Mehralipor
- Yosef Poreshgh
- Amir Shabanloo
- Mohammadreza Samarghandi
- Roghiyeh Safari
- Parisa Solgi
Abstract
Background and objectives: Cyanide ion is one of the most dangerous compounds for the man. Electrocoagulation process with high efficiency to removing pollutants, than researchers considered a effective process. The aim of this study was to determine the efficiency of electrocoagulation process by aluminum electrodes in cyanide removal from synthetic wastewater using magnesium oxide as a coagulantaid.
Mehods: In this study, a reactor with four aluminum electrodes with dimensions 200 × 20 × 2 mm use of 1 Liter of useful volume of electricity generating device for the removal of cyanide was used. Effect of parameters such as pH(3-9), voltage (10-30 V), the initial concentration of cyanide(50-500 ppm) and different concentrations of magnesium oxide particles (0.1 to 1 mg l) as coagulant aid in the process were investigated.
Results: The results show that the efficiency of EC process at pH 5, voltage of 30 V and an initial concentration of cyanide, 50 mg/lit in 45 minutes, was 80 percent. process will Efficiency by adding coagulant aid. In optimal amounts of coagulant aid (0.1 mg/lit) in electrocoagulation process on the removal of the cyanide 90% was achieved.
Conclusion: Electrocoagulation process is suitable process for the removal of cyanide. Also, Magnesium Oxide as a coagulant aid in this process was good and increase process efficiency.
Keywords
)